Page 118 - Green Pin Product Catalog
P. 118
FOR WIRE ROPE
LIFTING SLING FITTINGS
Figure 3
3) Open Long wedge sockets
Verify whether the wedge, socket and wire rope clip match to the wire rope size. In case of the long wedge
sockets (G-6419 and G-6429) the correct wire rope size shall be verified using the “GO” and “NO GO” hole
(see Figure 4);
• The wire rope MUST pass through the “GO” hole in the wedge;
• The wire rope shall NOT pass through the “NO-GO” hole in the wedge.
GO
hole
NO GO
hole
3 .1
Wire Rope
Clip hole
Figure 4
In case of the long wedge sockets (G-6419 and G-6429) mount the corresponding Wire Rope Clip (G-6240)
on the dead end section, providing a grip for the tail of the wire rope (see Figure 5 below). The tail length of
the wire rope has to be at least 6 times the wire rope diameter with a minimum of 150 mm.
Figure 5
118
