Page 261 - Green Pin Product Catalog

Instructions for use

For general (assembly) instructions about shackles we refer to chapter 1, and for master links to chapter 3.
For the mooring bolt, please find the specific instructions below.

Fishing and aquaculture products must be regularly inspected in accordance with the safety standards
and regulations given in the country of use. This is required because the products in use may be affected
by deteriorating conditions such as wear, misuse and overloading, which may lead to deformation and
alteration of the material structure. Inspection should take place at least every six months (follow the local
rules in the country of use), and more frequently when the links are used in severe operating conditions. FISHING & AQUACULTURE

®
Installation of the Green Pin Mooring Bolt
Green Pin Mooring Bolt NS9415 T must be installed by the use of two-component grouting. The advised
®
®
®
grouting to be used is Fosroc Lokfix S25 or equivalent. Before installation of the Green Pin Mooring Bolt
NS9415, always consult the installation manual of the used grouting and respect the instructions.
For instructions on how to machine the hole and the application and hardening time of the grouting,
please always consult the installation manual of the grouting supplier first. The mounting depth is indicated
by the green colour. Install the Mooring Bolt NS9415 T until the green-coloured part is reached.
The green-coloured part may not enter the hole.

®
®
Assembly of Green Pin Shackles to Green Pin Mooring Bolts
Ensure that the inside length of the chosen shackle is minimized so that the shackle cannot be (dis)assembled
from/to the Mooring bolt without disassembling the shackle pin.

In any case; Shackles and mooring bolts that are connected to each other shall have dimensions that are
adapted to each other, in order to prevent any increase in the risk of damage and fish escape. 5
®
Assembly of Green Pin Mooring Shackles
Green Pin Mooring Shackle is equipped with a chamber in which the pinhead will fit. During assembling
®
the pinhead will block in the chamber which facilitates easier assembling. Please note that it is not allowed
to fit the nut into this chamber.

261