Page 289 - Green Pin Product Catalog

Finish

®
Green Pin loadbinders and fittings are painted either red, green or blue.
Certification

Specific details of certificate availability can be found on each product page. Please verify your certification
requirements at the time of order.

Instructions for use LASHING CHAIN & FITTINGS

Loadbinders, lashing chain and fittings should be inspected before use to ensure that:
• all markings are legible;
• a loadbinder and/or fitting with the correct Lashing Capacity has been selected. For further details
we refer to EN 12195-3, standard for Lashing Chains;
• loadbinders, lashing chain and fittings should never be used for lifting or hoisting applications;
• the loadbinder or fitting should never be side loaded, since these products are suitable for in-line use only;
• the handle or any other locking system cannot vibrate out of position;
• the loadbinder and/or fitting must be hooked to the chain in such a way that you can operate the
loadbinder whilst standing on the ground;
• never use a loadbinder while standing on the load;
• always keep yourself out of the path of the moving handle;
• if the handle of the lever type loadbinder cannot reach the correct locked position, never use a cheater pipe.
In that case a ratchet type loadbinder must be used;
• in the locked position of a lever type loadbinder the bottom side of the loadbinder should touch the chain
link. In this position secure the handle to the chain using the loose end of the chain or a piece of rope or
soft wire;
• if the handle of a lever type loadbinder is released by hand, make sure you use an open hand under
the handle and push upward. Do not close your hand around the handle. Move the handle with caution
since it may whip as it comes free;
• loadbinders and fittings are free from nicks, gouges and cracks;
• loadbinders and fittings may not be heat treated as this may affect their Lashing Capacity;
• never modify, repair or reshape a loadbinder or fitting by machining, welding, heating or bending as this
may affect the Lashing Capacity;
• the loadbinder and fitting is used with the correct chain type/size.

LC 10 t LC 13.6 t

Loadbinder LCRR25ZHENT LCRR25ZHENT
P-7180

Connecting
links GPUMJ13 GPUMJT30
UMJT UMJ

Shorteners GPUCRCT25 GPUCRCT30
UCRCT

Chain FCHLASH1525 FCHLASH1330
FCHLASH
7

SLEEVE152530
Sleeve SLEEVE133050
SLEEVE152550
SLEEVE

Hooks GPUCSCT25 GPUCSCT30
UCSCT

289